LG 49VL5F Owner's Manual page 111

39. [Natural Mode] (In Tile Mode) (Command: d j)
To display the image naturally, the part of the image that
would normally be displayed in the gap between the monitors
is omitted.
Transmission
(d)(j)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(j)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
40. Tile H Position (Command: d e)
Adjusts the H Position in Tile Mode. (This function is only
available when Tile Mode is set to On and Natural Mode is set
to Off.)
Transmission
(d)(e)( )(Set ID)( )(Data)(Cr)
Data 00 - 32: -50(Left) - 0(Right)
* Left/Right values vary depending on the tile H Size.
Acknowledgment
(e)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
41. Tile V Position (Command: d f)
Adjusts the V Position in Tile Mode. (This function is only
available when Tile Mode is set to On and Natural Mode is set
to Off.)
Transmission
(d)(f)( )(Set ID)( )(Data)(Cr)
Data 00 - 32: 0(Down) - 50(Top)
* Vertical values vary depending on the tile V Size.
Acknowledgment
(f)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
42. Tile H Size (Command: d g)
Adjusts the H Size in Tile Mode. (Before adjusting the Tile H
Size, set the Tile H Position as 0 X 32. This function is only
available when Tile Mode is set to On and Natural Mode is set
to Off.)
Transmission
(d)(g)( )(Set ID)( )(Data)(Cr)
Data 00 - 32: 0 - 50
Acknowledgment
(g)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
43. Tile V Size (Command: d h)
Adjusts the V Size in Tile Mode. (Before adjusting the Tile V
Size, set the Tile V Position as 0 X 00. This function is only
available when Tile Mode is set to On and Natural Mode is set
to Off.)
Transmission
(d)(h)( )(Set ID)( )(Data)(Cr)
Data 00 - 32: 0 - 50
Acknowledgment
(h)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
44. [DPM] (Command: f j)
Sets the DPM(Display Power Management) function.
Transmission
(f)(j)( )(Set ID)( )(Data)(Cr)
Data 00: [Off]
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minute
05: 3 minute
06: 5 minute
07: 10 minute
Acknowledgment
(j)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
51