LG 49VL5F Owner's Manual page 70

10
[PM Mode]
• [Power Off](Default): Sets the normal DC off mode.
• [Sustain Aspect Ratio]: Identical to normal DC off mode except that the Switching IC remains on. On certain models,
this applies only to a specific input mode (DisplayPort) and has the same effect as [Screen Off Always] in other input
modes.
• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal
Shut Down mode.
• [Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), Off
Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's Power button or
the monitor's Off button.
NOTE
• In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's
Power or Input button, or the monitor's On button.
[Power On Delay](0-250)
• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
• You can set the delay interval in the range of 0 to 250 seconds.
[Power On Status]
• Select the operating status of the monitor when the main power has turned on.
• You can choose from among PWR (Power On), STD (Standby), and LST (Last Status).
• PWR (Power On) keeps the monitor powered on when the main power has turned on.
• STD (Standby) switches the monitor to Standby status when the main power has turned on.
• LST (Last Status) switches the monitor back to its previous status.
[Wake On LAN]
• Set whether to use [Wake On LAN].
• You can set the feature to On or Off for wired network.
• Wired Network: When set to [On], the Wake On LAN feature is enabled, letting you turn the product on remotely
through a wired network.
[Power On/Off History]
Display the device's power on/off history.