LG 49VL5F Owner's Manual page 120

60
82. [Change Password] (Command: s n, a7)
Changes password.
Transmission
(s)(n)( )(Set ID)( )(a)(7)( )(Data1)(Data2)(Data3)
(Data4)( )(Data5)(Data6)(Data7)(Data8)(Cr)
Data 1-4: 0-9 (Previously set password)
Data 5-8: 0-9 (New password)
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(a)(7)( )(Data1)(Data2)
(Data3) (Data4)( )(Data5)(Data6)(Data7)(Data8)(x)
* This feature may not be available for all models.
83. [Apply to all inputs] (Command: s n, 52)
Applies the picture mode and low value of the current input to
the same video value of all inputs.
Transmission
(s)(n)( )(Set ID)( )(5)(2)( )(Data)(Cr)
Data 01: Apply
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(5)(2)(Data)(x)
* This feature may not be available for all models.
84. OSD Position (Command: s n, ac)
Changes the screen position when the OSD Rotation function
is set to On.
Transmission
(s)(n)( )(Set ID)( )(a)(c)( )(Data)(Cr)
Data 00: Top
01: Medium
02: Bottom
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(a)(c)(Data)(x)
* This feature may not be available for all models.
85. Fail Over USB Input (Command: s n, 0a)
Selects a USB status for fail over.
Transmission
(s)(n)( )(Set ID)( )(0a)( )(Data) (Cr)
Data 00: [Off]
01: [Picture]
02: [Photos]
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(0a)(Data) (x)
86. Fan Failure Check (Command: d w)
Check the fan malfunction.
Transmission
(d)(w)( )(Set ID)( )(Data)(Cr)
Data FF: Read status
Acknowledgment
(w)( )(Set ID)( )(OK/NG)(Data)(x)
Data 00: Fan failure
01: Fan normal
* This feature may not be available for all models.