Table of Contents
Advertisement
Placing the Red and Silver Reflective Decals (Highway Version)
•
Place the reflective red and silver decals so that they are represented on at least half of the overall length of the transport. On the left
side of the transport, place the decals on the upper bar. On the right side of the transport, place the decals on base unit main frame,
and at the back of the unit on the upper bar, as shown below.
Placing the Amber, Red and Orange Reflective Decals (Ag Version)
•
Place the decals on the main frame and the light bar, as shown below.
Installing the Safety Chain Around the Ball Hitch Axle Weldment
•
Bolt the ring end of the safety chain to the underside of the goose-neck using a 3/4" x 5" Gr8 bolt and 3/4" locknut. Loop the chain
around the strap weldment located on the back side of the front axle.
14
Set-Up Instructions
Advertisement
Table of Contents
