Advertisement
4.
Incorrect supply voltage: check if the mains voltage matches the required volt
age on the nameplate.
5.
The water level has dropped too low; make sure that the suction height is
correct.
6.
Blown fuse or thermal protection has tripped the pump; replace the fuse or
allow the thermal protection to cool down.
7.
Fuse impeller is worn out; take the pump to your customer service
8.
Foot valve is above the water level; make sure the suction hose is properly
submersed.
9.
Pump has not had enough time to prime; fill the pump housing with water.
10.
Space is poorly ventilated; provide adequate ventilation and/or cooling.
11.
Air in the system; seal connections and connectors properly.
12.
Injector is clogged; take the pump to your customer service.
Removal
CE-declaration
See page 34.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should be
made suitable for reuse in order to prevent any adverse effects to
health and the environment caused by unregulated waste collection.
Therefore, please make sure that you bring old equipment to a
designated collection point. Alternatively, contact the original
supplier, who can make sure that as many of the components as
possible can be recycled
9
Advertisement
