NuAire GENIE Installation Manual
NuAire GENIE Installation Manual

NuAire GENIE Installation Manual

Universal surface mounted fans

Advertisement

Quick Links

1.0 SAFETY INFORMATION
The provision of the electrical supply and the connection of the unit to the electrical supply
must be carried out by a qualified electrician in accordance with latest edition of the wiring
regulations.
Isolate from power supply before removing any covers. During installation / maintenance ensure
all covers are fitted before switching on the mains supply.
All-pole disconnection from the mains as shown in the wiring diagram must be incorporated
within the fixed wiring and shall have a minimum contact separation of 3mm in accordance with
latest edition of the wiring regulations.
230V Genie units must be earthed.
Ducting must be securely fixed to the spigot to prevent access to live parts. Duct runs
terminating close to the fan must be adequately protected by suitable guards.
Precautions must be taken to avoid the back-flow of gases into the room from the open flue of
gas or other fuel-burning appliances.
This appliance should not be used by children or persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the safe use of the appliance by a person responsible for their safety.
Children shall not play with the appliance. Cleaning and user maintenance shall not be carried
out by children.
1.1 Hazard Symbols
GENERAL WARNING
Signifies a general warning regarding hazard specified by supplementary information.
ELECTRIC SHOCK
This unit must be completely electrically isolated before any panels are removed. Check
mains supply and control connections.
ROTATING PARTS
This unit contains fast moving rotational parts which may start automatically. It is the
sole responsibility of the installer to adequately guard these components.
REFER TO INSTRUCTION MANUAL
Read and understand the installation and maintenance manual before installing,
operating or maintaining this product.
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
GENIE
Universal Surface Mounted Fans
Installation Manual
27. 04. 21. Document Number 671182
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GENIE and is the answer not in the manual?

Questions and answers

Summary of Contents for NuAire GENIE

  • Page 1 REFER TO INSTRUCTION MANUAL Read and understand the installation and maintenance manual before installing, operating or maintaining this product. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 27. 04. 21. Document Number 671182...
  • Page 2: Mechanical Installation

    Nuaire product: *Light switch or similar (not supplied). •Protective Steel Toed Shoes - when handling heavy objects. Genie units are supplied with a finishing frame for use in semi- •Full Finger Gloves (Marigold PU800 or equivalent) - when recessed applications.
  • Page 3 Pull Cord Electronic Control Module Figure 6. Optional Semi-Recess Mounting Bracket 3.2 Semi-Recessed Ceiling Mounting Remove the shutters from the spigot if you are mounting the Genie Mounting bracket for in the ceiling. semi-recessed applications. Optional Extra Part No. 770982...
  • Page 4: Window Mounting

    •Select appropriate screws and spacers from the four sets of screws and three spacers supplied for mounting into different thickness’s of glass, see table. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 27. 04. 21. Document Number 671182...
  • Page 5: Electrical Installation

    Up to 2 m 0.75 mm Up to 4 m 1.00 mm Up to 6 m 1.50 mm Up to 10 m 2.50 mm Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 27. 04. 21. Document Number 671182...
  • Page 6 GENIE-H run on timer is fixed to 15 minutes. GENIE - H12 230V GENIE - X12 GENIE - XH12 SL SL Fuse 2 amp Transformer Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 27. 04. 21. Document Number 671182...
  • Page 7: Maintenance

    •Using a soft brush or dry cloth remove dust and dirt from the fan module. Ensure that Nuaire product is made safe from any electrical / water / refrigerant supplies before dismantling commences. This work •Wash front cover in warm soapy water and dry thoroughly.
  • Page 8 GENIE Installation Manual 10.0 Base Drill Pattern Base Drill Pattern Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 27. 04. 21. Document Number 671182...

Table of Contents