WebGate C1080PD-F1 Quick Start Manual

Introduction
C1080PD-F1/C1080D-F1 is integrated FULL HD CCTV camera to detect the flame source. The
flame source generates the inherent infrared wavelength. To minimize the false alarm and to
increase the accuracy and detection speed, the newest and high-performance infrared sensor
is adopted. When a fire occurs, the alarm can be sent to the user within few seconds via DVR,
CMS and smartphone app.
1. It provides rapid response and high accuracy for a fire by using the newest and high-
performance infrared sensor.
2. Due to the rapid fire alarm via DVR, CMS and smartphone app, user can quickly respond
to the fire.
3. Depending on the installation environment, user can set the sensitivity and recognition time.
4. When a fire occurs, user can know the location of fire through the smartphone app.
5. The maximum transmission distance is 400M by using EX-SDI.
6. C1080PD-F1 can transmit the power (PoC) and control signal (CoC) in addition to the video
signal through only one coaxial cable.
※ Installation Precautions
1. This camera is not a fire-fighting appliance.
2. This camera is not applied by the law on fire protection installation maintenance and safety
management.
3. If the camera flash, electric heaters, welding sparks, vibration, etc. are consistently occurred,
they can cause malfunction.
4. The front of the sensor must always be kept clean.
Rev 1.1