Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WebGate C1080Bullet Series
Summary of Contents for WebGate C1080Bullet Series
- Page 2 Caution for installation and usage 1. Check Frame rate setting based on power frequency - Set Frame rate to 25Hz if your region is using 50Hz(PAL) power frequency, or set to 30Hz for 60Hz(NTSC) region. (OSD : System Frame rate). 2.
- Page 3 Privacy support Camera can support up to 28 privacy masking areas. OSD control and F/W upgrade OSD control and Firmware upgrade of camera can be achieved from PC or Webgate DVR through RS485 communication.
-
Page 4: Supplied Accessories
Supplied accessories Please check if all the supplied accessories are included. Camera Installation / User Manual Monitoring Cable(IR18) Hood Screw Iron Screw L Wrench C1080BL-IR48-AF Hood C1080BL-IR18-AF Hood Product description Name Camera Camera Hood RS485 Port Power input connector Video output BNC connector Camera installation Auto Iris connector wiring We recommend to use ‘Adjust Focusing’... - Page 5 Power connection Adapter should be DC12V or AC24V. But in case use DC power, Please be careful in the polarity when connect power. OSD control and Firmware upgrade using RS485 communication 1. Connect Webgate’s HD-SDI DVR with camera through RS485.
-
Page 6: How To Use Osd Menu
- PC for Firmware upgrade and DVR need to be connected with network. - HD Camera Upgrade program and firmware can be downloaded from Webgate’s website. 4. Select a Firmware and click Load button. Then firmware upgrade will proceed and the camera will reboot automatically after completion. - Page 7 - D&N AF : Autofocusing after Day&Night chages Color Maintains Color(Day) mode regardless brightness. & B&W Maintains B&W(Night) mode regardless brightness. NIGHT Auto In accordance with brightness, camera switches Color mode and B&W mode automatically. - LUX LEVEL(LOW, MIDDLE, HIGH) : This value is the standard for Day &...
- Page 8 KELVIN, R-GAIN and B-GAIN value. CHROMA Adjust Chroma level. (10, 0~20) IMAGE SHARPNESS Adjust sharpness. The higher value will show more (5, 0~10) clear video image H-MIRROR Mirror image. Left and right will be reversed V-MIRROR Flip image. Up and down will be reversed. Digital ZOOM Zoom image by 16 steps.
-
Page 9: Product Specification
(ON, OFF) brightness of dark areas. Reduce image noise under low light condition (LOW, MIDDLE, HIGH) FRAMERATE Power frequency 60Hz(NTSC) : 30Hz(fps) video output (25Hz, 30Hz) Power frequency 50Hz(PAL) : 25Hz(fps) video output SYSTEM MODEL Displays model name CAM ID Max. - Page 10 Distance approx. 200m of RG6, 150m of RG59 Control Method OSD(Internal Joystic), DVR, CMS(Control Center) Filter True Day & Night 1 ~ 10 steps Mirror Horizontal / Vertical OFF, 0 ~ 4 setup OFF, LOW, MIDDLE, HIGH OFF, ON Video OFF, LOW, MIDDLE, HIGH Control OFF, x2 ~ x10...
- Page 11 Dimension (unit : mm) C1080BL-IR18-AF C1080BL-IR-48-AF...
- Page 12 How to upgrade C1080 Series Camera through DVR 1. Check F/W version of DVR and Camera. - Camera : Over v1.2.x (System Version info. v1.0.x doesn’t support remote upgrade) - DVR : Over v3.9.30 - Control Center : Over v2.26.x 2.
- Page 13 button. <Note> 1) User doesn’t need to enter port number even though connected DVR has specific port. Just enter IP address of DVR. 2) Select correct F/W per model. Otherwise camera might not show correct display. - C1080B : C1080B_v1.xx.x.bin - C1080BM : C1080BM_v1.xx.x.bin - C1080D Series(D,VD,D-IR,VD-IR) : C1080VD_v1.xx.x.bin - C1080AF Series(D-AF,D-IR-AF,VD-AF,VD-IR-AF,BL-IR18-AF,BL-IR48-AF) : C1080AF_v1.xx.x.bin...
- Page 14 7. Camera OSD menu is activated when click Camera Setup menu and there will be control window at the right bottom side of the screen. <Note> 1) The possible delay could be occurred during menu control based on network situation. 2) Make single channel in DVR then click PTZ button of DVR then it will be same as control in C.C (Control Center).
- Page 15 8. Please pay attention while F/W upgrade into the latest version and F/W upgrade with wrong F/W will make camera work abnormally. Please refer to below classified table to check F/W version. 1) Directions for upgrade of camera + If the camera is upgraded with wrong F/W, camera will not be working normally. + C1080B/BM model can be upgraded with the latest F/W regardless of mechanical part and lens.
- Page 16 B type Classification mechanical part Non AF Series : C1080VD_v1.14.0 a type b type Classification By lens AF Series Upgrade not required C1080AF_v1.13.0a...
Need help?
Do you have a question about the C1080Bullet Series and is the answer not in the manual?
Questions and answers