Overheat Protection; Cleaning And Maintenance; Recycling; Issue Probable Cause Solution - Fakir WARMY User Manual

EN
when it falls or when it is in danger of falling. This feature helps prevent accidents and
the heater keeps operating when turned upright.

Overheat Protection

Your appliance is protected by overheat protection that automatically turns off the
appliance in case of overheating. In this case, unplug the appliance, wait for approx. 30
minutes and eliminate the possibility of overheating, by; Check whether the appliance,
cable, and the plug are damaged. If there is no damage, plug the appliance in again
and operate as described above. If your heater still does not work, contact the Fakir
Authorized Service for assistance.

Cleaning and Maintenance

1.Unplug your appliance and wait for the heater to cool before cleaning.
2. Wipe the outer surface of your appliance with a soft damp cloth (non-wet cloth) and
dry the outer surface before operating the heater.
WARNING!
Do not submerge the heater.
Do not use cleaning chemicals such as detergents and abrasive materials.
Do not let the inside of the appliance get wet, otherwise danger may occur.
3. Put the heater back in its original package or put it in a clean box in order to store the
heater.

Recycling

Dispose of the appliance according to the environmental regulations applicable in your
country.
Electrical waste must not be disposed of together with household waste.
Dispose the appliance to the waste baskets designated for electrical
waste. The packaging of the appliance consists of recycling-capable
materials. Throw out them in suitable recycling bins.
This appliance is compatible with 2012/19/EU AEEE directive.

Issue Probable Cause Solution

Your appliance is processed via Quality Control against any malfunction.

Dispatch

Carry the appliance in the original package or a similar, well-padded package to prevent
damage to the appliance.
20