Advertisement
SOFTWARE INSTALLATION
1. Insert the mini-CD (included with the IP-EWST / IP-EWST-POE set) into the PC to be used as a
master station.
2. Install the TalkMaster™ software by following the on-screen prompts, or by navigating to your CD
drive and executing "setup.exe" to begin the installation process.
3. Consult the TalkMaster™ User Guide document for further software functionality and configuration
information.
HARDWARE DIAGNOSTICS & TROUBLESHOOTING
To confirm proper hardware functionality, it is best to use an Ethernet crossover cable (not included).
This can be used to directly connect the IP-EWST to any PC with a standard 10/100 Ethernet interface
for troubleshooting and preprogramming.
Follow these steps to troubleshoot proper connection:
1. Ensure proper power is connected to the IP-EWST. If using the IP-EWST-POE, make sure that
the Ethernet device being connected is 802.3af-compliant, or that a proper power supply is used
(7.5 to 9VDC, 300mA). Do not connect both Power-over-Ethernet and a separate power supply!
2. Check the IP-EWST diagnostic LEDs labeled LD10, LD9, LD8, and LD1 for proper illumination
(located next to the manual substation pushbuttons). Consult the following table for LED indicator
status meanings:
Operational Mode
Normal operational mode. TalkMaster™ is
active. Intercom can communicate.
LAN connection is inactive. The RJ-45 may
be unplugged, or LAN lost power.
Cannot connect, or if DHCP IP is enabled,
address is not being assigned.
TalkMaster™ software is not running on
PC or not set to communicate.
TalkMaster™ software at the server has
"Scanned" for intercoms in the
Configuration Mode utility setup.
Connection lost while TalkMaster™ was
active on.
Receiving audio. The TalkMaster™
software / PC microphone is on.
Sending audio. Manual talk button is
pressed or TalkMaster™ has engaged
"listen" mode.
Intercom is in "Server" mode, waiting for a
client to request connection (LD10 flash
alternates 1sec fast, 1sec slow).
LD10
LD9
ON
ON
FLASH
OFF
FLASH
ON
FLASH
ON
FAST FLASH
ON
FLASH
OFF
ON
ON
ON
ON
DUAL FLASH
-
LD8
LD1
-
-
-
-
ON
ON
ON
-
ON
-
ON
-
-
FLASH
-
ON
-
-
Pg. 3
Advertisement
