Measurement In Radio Triggering Flash Mode (C-700R Only) - Sekonic SPECTROMASTER C-700 Series Operating Manual

5-5 Measurement in Radio Triggering Flash
Mode (C-700 Only)
The Radio Triggering lash Mode is a measurement method that triggers flash
from the meter wirelessly by connecting to the flash through a radio receiver (sold
separately). This allows a single person to cordlessly perform flash measurement.
Before taking a measurement, you must set the transmitter (meter) and the receiver
to the same radio channel.
* Compatibility with C-700R
®
The PocketWi ard
®
PocketWi ard systems are compatible. Read the instruction manual of the radio
receiver for information about how to operate it.
or information about compatible devices, refer to LPA's website (www.pocketwi ard.
com).
A
●
Do not use near industrial, scientific or medical devices such as pacemakers.
The radio waves may affect the operation of pacemakers.
Series from LPA and other flash devices e uipped with
5. Measuring Light Sources [Measurement Screen]
77