Table of Contents
Advertisement
5-3
Measurement in Cordless Flash Mode
Cordless lash Mode is preferable when the flash to sub ect distance is too far to
use a sync cord or when wireless measuring is desired.
In this measuring mode, the meter will go into measurement standby mode (for 0
seconds) to wait for a burst of flash to measure.
Operation
1.
Touch the [Tool Box] icon.
Touch and select the [Digital ilm] button. ( P92)
on the Measurement Screen
2.
Select the type of camera (Digital or ilm) used.
Touch either the [Digital] or [Film] button.
OK Button
[Tool Box] Icon
Digital/Film Screen
5. Measuring Light Sources [Measurement Screen]
Tool Box Screen
The selected icon will be displayed
encircled in blue.
Cancel Button
66
The set
content is
displayed.
Advertisement
Table of Contents
