Table of Contents
Advertisement
4.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H
(
the flash. ( P
,
Measurements can now be made.
NOTE
Measurements and display will take longer in light levels below 0l . The LCD
illumination will normally switch off during measurements to avoid influence to
measurements.
5.
The red point shows the correction value from the target color
temperature.
6.
Memorize the measurement results.
Measurement results can be memori ed.
To record measurements, press Memory Button
NOTE
The value per matri can be changed by the item White Balance Step in page
of Setting. Match the value with your camera. ( P136)
5
to measure.
should be set to L
2
) depending on the brightness of
P 0)
4. Setting the Measuring Conditions
Light Selection Ring
(
)
(
)
Measuring Button
Displays corrected value
Displays value per one matri
. ( P 7)
7
2
5
Advertisement
Table of Contents
