Frequently Ask Question (Faq); (Q1) Where Should I Place My Wireless Router For Wider Wifi Coverage; (Q2) I Entered The Device's Lan Ip Address Or Domain Name For Prn3009 In The Web Browser But Cannot Access The Web Ui. What Should I Do - PROLiNK PRN3009 Product Faqs

1 Frequently Ask Question (FAQ)

The FAQ is use to address some special setting that's is required that may or may not be covered in the
user manual.

(Q1) Where should I place my wireless router for wider WiFi coverage?

To placing the PRN3009 to provide more stable Wi-Fi signals and cover a wider area, position your
router as follows:
Place it high up at the center of your apartment and ensure that there are least walls and ceilings
-
between the router and your wireless devices, such as mobile phones and laptops.
Put it at a place with good ventilation. Unfold its antennas. Do not put it in an enclosure, such as
-
a wire distribution box.
Avoid placement of the PRN3009 units with high potential of signal obstructions (e.g. walls,
-
doors, aquariums) or any form of Bluetooth/Devices with high wireless transmission (e.g.
microwaves) within a 30cm radius.
(Q2) I entered the device's LAN IP address or Domain Name for PRN3009
in the web browser but cannot access the Web UI. What should I do?
1. Check the hardware connection on which mode you are set. If the setup is wrong, switch off the
router first and follow the setup router connection as follow. Please note, for other Mode setup
please check on PRN3009 User manual.
2. Check whether the devices is functioning correctly. The Power LED indicator will light up solid
green permanently once the device is powered up. The Other LED indicator except for Wi-Fi
LED indicator will light up a few second and turn off. If the all LED indicator not light up in
this sequence, then some internal faults may have occurred.
3. Verify every physical connectivity by checking all the corresponding port's link LED (LAN
port) lights up. If not, try a good known RJ45 cable and reconnect again.
1