Tesla PowerStar GT400 Manual page 55

Remove the water tank and pour the water into the sink. Check the water filter (15) regularly. If the
water filter is not replaced in time, calcium deposits may start to accumulate in it, causing damage to
the appliance or reducing its performance.
Cleaning air intake
If the appliance draws in a larger object, it may sometimes be
necessary to clean the air intake as well.
After removing the water tank and the filter from the main body,
also remove the air intake plastic cover (14), grasp the plastic
part in the pliers and pull it out. Clean the air intake and then
reinstall the cover.
The appliance should only be operated with the plastic air supply
cap installed.
Replacement and cleaning of microfiber mops
1. Drain the remaining water into the sink.
2. The cleaning microfiber mops can be washed in warm
water with a small amount of dish soap if they are dirty.
3. If necessary, wash both microfiber mops in warm soapy
water, maximum 30 - 40°C, without bleach or fabric
softener. Let them dry naturally, do not use the clothes
dryer.