Rear I/O Panel
VGA
DVI-D
LAN Port LED Status Table
Link/ Activity LED
Status
Description
Off
No link
Yellow
Linked
Blinking
Data activity
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1.
Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog
below.
2.
Select Mute the rear output device, when a front headphone plugged in.
3.
Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
PS/2 Mouse
COM
PS/2 Keyboard
Speed LED
Status
Off
Green
Orange
Line-out
LAN
USB 2.0
USB 3.2
Gen 1 5Gpbs
(Type-A)
Description
10 Mbps connection
100 Mbps connection
1 Gbps connection
Rear I/O Panel
Line-in
Mic in
7