Importing The Initial Settings Into The Eb-50 - Mitsubishi Electric EB-50GU-A Operation Manuals

5.9 Importing the Initial Settings into the EB-50

The data edited with the InterlockConfigTool can be exported and then imported into the EB-50 without the
need for data conversion.
[Data Export Procedures]
(1) If using the USB memory, insert it into the USB port on the computer.
(2) Select "Export" from the Menu on the "Interlock control list" screen.
(3) Specify the save destination folder, and then click "Save."
Note
・The exported Initial Settings Data will be saved to as the file name "SettingData.dat".
A progress bar will appear to indicate the progress of the
data export process. When the process is complete, the
progress bar will disappear.
(4) If using the USB memory, remove it from the USB port. Refer to the instructions manuals for the
computers and/or operating systems you use for how to remove the USB memory drive.
Important
・Only import the edited Initial Settings data into the EB-50 from which the original data was
exported to the InterlockConfigTool. If the edited data is used to overwrite the data on
other EB-50, all data including group information will be overwritten.
・Do not change the names of the files that contain the exported Initial Settings.
28
英語ＯＳ画像に差し替える