Subscribe to Our Youtube Channel
Related Manuals for Q CELLS Q.MAXX-G3 Series
Summary of Contents for Q CELLS Q.MAXX-G3 Series
- Page 1 DRAFT INSTALLATION AND OPERATION MANUAL Q.MAXX-G3 solar module series Valid for Africa, Europe, LatinAmerica, South America...
-
Page 2: Table Of Contents
• Any international, country specific and regional accident-pre- GROUNDING and use of quality crystalline solar modules from Q CELLS and vention regulations. their installation, mounting, wiring, maintenance and disposal. • Other applicable stipulations provided by the relevant... -
Page 3: Introduction
Ä necessary safety regulations during set-up and installation. Frame height 32 mm Q CELLS assumes no liability on the basis of these instructions. Area 1.90 m² Q CELLS is only liable in the context of contractual agreements or in the context of accepted guarantees. Q CELLS accepts no Weight 19.5 kg... -
Page 4: Requirements
Fig. 2: Forces acting on the module are relayed to the mounting Installation options for crystalline Q CELLS modules. All dimensions are given in mm. Also observe the maximum Please note the following guidelines that apply to the installation substructure. - Page 5 OPTION CLAMPS* [MM] FACTOR system including clamps has to be evaluated by the system supplier. The listed test load values for Q CELLS were determined [PA] [PA] with the following clamp parameters: clamp width = 40 mm and clamp depth = 10 mm. The system installer is responsible for Q.MAXX-G3...
-
Page 6: Electrical Layout
Leave modules in their original packaging until installation. Ä Store the modules securely in cool and dry rooms. The packaging is not weatherproof. INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS... -
Page 7: Preparation Of Installation
Ä Do not install modules in close proximity to air lation. conditioning systems. INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS... -
Page 8: Module Installation
Only use dry, insulated tools for electrical Ä Insulate any exposed cable ends. work. Only connect cables with plugs. Ä INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS... -
Page 9: Electrical Installation Safety
Inverter click 180° 180° INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS... -
Page 10: After Installation
Ensure that cables are protected from abrasion, tension, compression and cutting forces in full accordance with AS / NZS 3000 and all other relevant standards. INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G3 – Q CELLS... -
Page 11: Maintenance And Cleaning
MAINTENANCE AND CLEANING Q CELLS solar modules are known for a long operating life and Note! Module damage may occur! minimal maintenance effort and expense. Dirt and grime are Ä Do not clean modules with water if there is a usually washed away by rain. - Page 12 AUSTRALIA PTY LTD Suite 1, Level 1, 15 Blue Street North Sydney, NSW 2060 Australia +61 (0)2 9016 – 3033 +61 (0)2 9016 – 3032 EMAIL q-cells-australia@q-cells.com www.q-cells.com/au Subject to change without notice. © Q CELLS Installation manual solar modules Q.MAXX-G3_2020-11_Rev01_AU...
Need help?
Do you have a question about the Q.MAXX-G3 Series and is the answer not in the manual?
Questions and answers