Related Manuals for Q CELLS Q.POWER-G5.1
Summary of Contents for Q CELLS Q.POWER-G5.1
- Page 1 INSTALLATION AND OPERATION MANUAL Q.POWER-G5.1 / L-G5.1 • Q.PRIME-G5.1 / L-G5.1 SOLAR MODULES Valid for Africa, Asia, Europe, Latin America, South America...
-
Page 2: Table Of Contents
The installation tech- niques, handling and use of the product are beyond company control. Therefore, Hanwha Q CELLS assumes no responsibility for loss, damage or expense resulting from improper installation, handling or misuse. -
Page 3: Introduction
Weight 23 kg 23 kg installation. Q CELLS assumes no liability on the basis of these Max. system voltage V 1000 (IEC) / 1000 (IEC) / instructions. Q CELLS is only liable in the context of... -
Page 4: Requirements
Fire protection class • Clamps that satisfy the structural requirements of the into contact with any part of the panel. Only substances, installation site. which are released by Q CELLS, are allowed to be used Snow load [Pa 5400 5400 •... -
Page 5: Mounting Options
PLANNING 2.3 Mounting options PLANNING 2.3 Mounting options Fig. 3: Installation options for crystalline Q CELLS modules. All dimensions are given in mm. TYPE OF MODULE TYPE LONG SIDE SHORT SIDE Also observe the allowed static loads and clamping range as specified on the following page. -
Page 6: Electrical Layout
Sizing of control systems connected to the outlets of module side) minus ends. Observe the maximum permitted number the solar modules of strings as indicated in the specifications provided by Q.POWER-G5.1 CL1 (4 point clamping on 246-493 5400/4000 Ä Please follow the valid national guidelines for the Q.PRIME-G5.1... -
Page 7: Installation
Cover the modules with an opaque which have been confirmed in writing by Ä Ä Follow any instructions on the packaging. material during installation. Q CELLS. confirmation letter ! Fire Risk! ! Module damage may occur! ! Module damage may occur! Ä... -
Page 8: Preparation Of Installation 12 Ä
INSTALLATION 3.2 Preparation of installation INSTALLATION 3.3 Module installation ! Risk of fatal injury due to electric ! Risk of injury due to falling Option 1: DANGER WARNING Ä Maintain an interval of at least 10 mm shock! modules! Ä Fasten the module with 4 clamps between two modules along the short in the specified clamping range,... -
Page 9: Electrical Connection
ELECTRICAL CONNECTION 4.1 Safety ELECTRICAL CONNECTION 4.2 Electrical installation safety DANGER! ! Risk of fatal injury due to electric ! Risk of fatal injury due to electric ! Risk of fatal injury due to electric DANGER DANGER DANGER Risk of fatal injury due to electric shock! shock! shock! shock! -
Page 10: After Installation
ELECTRICAL CONNECTION ELECTRICAL CONNECTION 4.4 After installation 4.3 Connection of modules ! Module damage may occur! Ä Use solar cables for the connection at NOTE ! Module damage may occur! Ä Ensure that all necessary safety and NOTE the junction box outlet. functional tests have been carried out Ä... -
Page 11: Grounding
(waterfall, reservoir, etc.), these situations may cause PID reducing the performance of the PV system. To reduce Q CELLS solar modules are known for a long operating the risk of PID, we strongly recommend installers to have life and minimal maintenance effort and expense. Dirt such protections: and grime are usually washed away by rain. - Page 12 CONTACT HANWHA Q CELLS (QIDONG) CO., LTD. No. 888 Linyang Road, Qidong City, Jiangsu Province, TEL +86(0)513 8360 – 6222 EMAIL sales@hanwha-qcells.com China FAX +86(0)513 8360 – 6376 www.q-cells.com Subject to change without notice. © Hanwha Q CELLS Installation_Manual_Q.POWER_Q.PRIME_G5.1_L-G5.1_module_series_2017-12_Rev02_EN...
Need help?
Do you have a question about the Q.POWER-G5.1 and is the answer not in the manual?
Questions and answers