Sony CDU311 User Manual page 11

Cd-rom drive unit
Table of Contents

Advertisement

Note c)
Insert the disk labeled "MS-DOS Device Driver & Utilities" into the
floppy drive. Click on the Start button on the pop up menu and select the
Run option. When the dialog box appears, type
A:\INSTALL
and click on the OK button. The installation menu will appear.
Follow the instructions of the INSTALLATION utility. Reboot the
computer, run Windows 95, and verify the 8X CD-ROM drive setting by
clicking on the My Computer icon. The CD-ROM drive icon will appear.
Case 2: Using CD-ROM drive under MS-DOS by restarting computer in
MS-DOS mode.
If you want to use CD-ROM drive under MS-DOS by restarting computer
in MS-DOS mode, you should follow this installation procedure.
Insert the disk labeled "MS-DOS Device Driver & Utilities" into the
floppy drive. Execute INSTALL.EXE, then the installation menu will
appear. Follow the instructions of the INSTALLATION utility.
After that, use your DOS editor to edit the AUTOEXEC.BAT file by typing
C:\EDIT AUTOEXEC.BAT
and insert REM at the beginning of the following line as shown:
REM C:\WINDOWS\COMMAND\MSCDEX.EXE /D:mscd000 /M:12 /V
Save this modification by selecting File, Save, and Exit from the editor.
Then use your DOS editor to edit the DOSSTART.BAT file by typing
C:\EDIT C:\WINDOWS\DOSSTART.BAT
and add the following line:
C:\WINDOWS\COMMAND\MSCDEX.EXE /D:mscd000 /M:12 /V
20
Software Installation
Save this modification by selecting File, Save, and Exit from the editor.
Now restart your computer, run Windows 95, and choose restart computer
in MS-DOS mode. The CD-ROM drive is now available in MS-DOS
mode.
Case 3: Using CD-ROM drive under MS-DOS by previous MS-DOS mode or
command prompt mode only.
If you want to use CD-ROM drive under MS-DOS by Previous MS-DOS
mode or Command Prompt only mode, you should follow this installation
procedure.
Insert the disk labeled "MS-DOS Device Driver & Utilities" into the
floppy drive. Execute INSTALL.EXE, then the installation menu will
appear.
Follow the instructions of the INSTALLATION utility.
After restarting Previous MS-DOS mode or Command Prompt only mode,
the CD-ROM drive will now be available in these modes.
Software Installation
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents