Reef Factory Level sensor Device Manual page 10

4. After the setup procedure is finished (after pressing the "FINISH" button), the current status
of your device will appear on the screen.
5. In the upper right corner of the screen you
you can introduce any necessary changes or to repeat the setup procedure. It also contains
additional functions, including options for Wi-Fi network management, device network
password, which protects your device against any unauthorized remote access, Smart Reef
account management, language selection and the possibility to restore your device to
default settings. Moreover, the icons show the current status of connection to your wireless
network and to the Smart Reef system.
The symbol means that the connection is OK, while the
no connection.
6. Now you'll need to install your Level sensor in such a way that correct liquid level
measurement is ensured in your tank. Gently tighten the stabilizing screw. Try not to use
too much force, as the elements of the device are made of plastic and their resistance to
mechanical stress is technologically limited.
will find a drop-down menu icon. There
Level sensor device manual
symbol means that there is
10/12