Parts Ordering - Emerson FISHER GX Instruction Manual

Instruction Manual
Form 5770
June 2006
DATE OF MAINTENANCE
PORT DIAMETER
GE11233
Figure 23. Repair Nameplate (Spaces Provided for Recording Trim Maintenance Data)

Parts Ordering

Each valve is assigned a serial number which can
be found on the valve or on the nameplate (figure 2
and key 35, not shown). The nameplate will normally
be fitted to the actuator. Refer to this serial number
when contacting your Emerson Process
Management sales office for technical assistance.
When ordering replacement parts refer to this serial
number and give the part description from the
following parts list.
Use only genuine Fisher replacement
parts. Components that are not
supplied by Emerson Process
TRIM MATERIAL
Note
GX Valve and Actuator
FLOW
CHARACTERISTIC
FLOW CAPACITY
Management should not, under any
circumstances, be used in any Fisher
valve, because they will void your
warranty, might adversely affect the
performance of the valve, and might
jeopardize worker and workplace
safety.
Note
Neither Emerson, Emerson Process
Management, Fisher, nor any of their
affiliated entities assumes
responsibility for the selection, use
and maintenance of any product.
Responsibility for the selection, use,
and maintenance of any product
remains with the purchaser and
end-user.
29