(4) Lossnay core
Unscrew the screws (two screws, indicated by
Draw the Lossnay cores from the unit by holding the
handles.
(5) Damper parts and Damper motor
Remove the fi x plate for the lead wires and disconnect the wires from the circuit board. (Refer to (3) (page 25)).
Unscrew the screws (two screws, indicated by
) for the core holder.
Lossnay core
) for the damper, and draw the damper from the unit.
Damper
─ 26 ─
Core holder
Handles
A
GM cover
B