Download Print this page
Mitsubishi Electric LGH-50RSDC-E Operating Instructions

Mitsubishi Electric LGH-50RSDC-E Operating Instructions

Lossnay energy recovery ventilator

Advertisement

Quick Links

Lossnay Energy Recovery Ventilator
Model:
LGH-50RSDC-E ( 220-240V 50Hz )
Operating Instructions
Please read this manual carefully before use for proper and safe use.
Do not attempt to install the product by yourself.
Safety precautions
The following signs indicate that death or serious injury may be caused by failure to heed the precautions described below.
Do not turn the remote controller on or off when flammable
gas has leaked.
(It could catch fire or cause explosion with sparks released from
Prohibited
electric contactor.)
Open windows to ventilate.
Do not modify or disassemble.
(It could cause fire, electric shock or injury.)
Do not
disassemble
Do not apply water to the unit and remote controller.
(Electrical shock can result.)
Do not wet
Do not poke your fingers or sticks into the air intake and outlet
while the product is operating.
(Failure to heed this warning may result in injury.)
Do not touch
Do not place a burning appliance in a place where it is exposed
directly to the wind from Lossnay.
(It could cause an accident as a result of incomplete combustion.)
Don't operate with the "BY-PASS" when heating the room in winter.
(Condensed water may drip from the unit and wet the surface of
ceiling.)
Do not use at a place where exposed to high temperatures (40°C
or higher), naked flames, or in environment with heavy fumes.
Prohibited
(It could cause fire.)
Do not use in an environment such as a chemical factory, where
hazardous gases such as acidic gases, alkaline gases, organic
solvent fumes, paint fumes, or gases containing corrosive
components are generated.
(It could malfunction.)
Names of the parts
Control box
Lossnay core
Damper plate
Maintenance cover
Air filter
(4 filters)
WARNING
Don't operate with wet hands.
(Electrical shock can result.)
Wet hands prohibited
Use the specified power supply and voltage.
(Use of incorrect power supply could cause fire or electric shock.)
Make sure the power supply isolator is turned off on the power
distribution panel before starting maintenance.
(It could cause electric shock or injury if it is turned on.)
The instructions
given must be
When any abnormal conditions (burning smell, or others) are
observed, stop operation, turn off the power supply isolator on
followed.
the power distribution panel and consult your dealer.
(Continuing operation under such conditions could cause electric
shock, fire, or damage.)
CAUTION
Securely install parts after maintenance.
(It could cause injury if parts fall.)
Put on gloves during maintenance.
(It could cause injury.)
Make sure the power supply isolator is turned off on the power
distribution panel when Lossnay is not used for a long period
of time.
(It could cause electric shock, power leakage, or fire as a result of
The instructions
deteriorated insulation.)
given must be
This appliance is not be used by children or persons with reduced
followed.
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
Children should be supervised to ensure that they do not play
with the appliance.
(For the user)
Air exhaust fan
Air supply fan
0902874HN5201

Advertisement

loading

Summary of Contents for Mitsubishi Electric LGH-50RSDC-E

  • Page 1 0902874HN5201 Lossnay Energy Recovery Ventilator Model: LGH-50RSDC-E ( 220-240V 50Hz ) Operating Instructions (For the user) Please read this manual carefully before use for proper and safe use. Do not attempt to install the product by yourself. Safety precautions The following signs indicate that death or serious injury may be caused by failure to heed the precautions described below.
  • Page 2 Operation This Lossnay unit is operated by Remote controller. (provided by installer) Please refer to installer for further information. 1. Fan speed n The wide range of fan speed and the low power consumption This unit has 5 fan speed settings 110 l/s to 25 l/s, and 14w ultra low power consumption for Lossnay ventilation, thanks of DC blushless motor technology.
  • Page 3 Maintenance Cleaning the parts Remove all dust and dirt on air filters and Lossnay cores at regular intervals in order to prevent a deterioration in the Lossnay functions. 1) Air filters Guideline: Clean the air filters once a year. Clean the Lossnay cores once two year. Use a vacuum cleaner to remove light dust.
  • Page 4 Heating Cooling 1.17 10.2 77.5 0.67 81.5 72.5 26.5 Lossnay Energy 0.35 85.5 recovery setting 0.20 80.5 0.13 LGH-50RSDC-E 230* 1.80 13.8 1.20 10.2 0.70 26.5 BY-Pass Ventilate setting 0.35 0.20 0.13 (1mmH O=9.80665Pa) PB stands for “Power By-pass”. Specifications are in 230V / 50 Hz operation. The unit operation is available with 220-240V / 50 Hz.