General Safety Directions - Parkside PAPK 12 A2 Translation Of The Original Instructions

LED display while
charging.
General Safety
Directions
Caution! When
using power tools,
observe the following
basic safety measures for
the prevention of electric
shocks and the risk of
injury and fire. Please
read all these instructions
before using this electric
tool and please keep the
safety instructions.
Careful handling
and use of battery
devices
• Charge the batteries
only in chargers that
are recommended by
the manufacturer. Risk
of fire if a charger that
is suitable for a specific
type of battery is used
with other batteries.
• In the power tools,
use only the batteries
designed for the pur-
pose. The use of other
batteries may result in
injuries and risk of fire.
• Keep the unused bat-
tery away from paper
clips, coins, keys, nails,
screws and other small
metal objects, which
could cause bridging
of the contacts. A short
circuit between the
battery contacts may
cause burns or fire.
• If used incorrectly, li-
quid may leak from the
battery. Avoid contact
with this. In the event
of accidental contact,
rinse off with water.
If the liquid gets into
eyes, seek medical
assistance. Leaking
battery fluid may cause
skin irritations or burns.
• Do not use damaged
or altered batteries.
Damaged or altered
batteries can be unpre-
dictable and lead to
GB IE
25