Software update procedure
1. Save the updated file to the USB root folder.
2. Change the file name to "Merge.bin".
3. Insert the USB, and go to OSD setting > Device setup, click Software update
to initiate update procedure.
OSD Setting
Picture
Menu
Picture mode
Color temperature • Press /on the remote control to select a preset color
Aspect ratio
Backlight
Color range
Anti-burn in
Gamma
Sound
Menu
Sound mode
Balance
Surround sound
Bass
Treble
• Press/on the remote control to select a picture mode.
Options are Standard, Bright, Soft, and Custom.
• Under Custom mode, press /on the remote control
to adjust Contrast, Brightness, Hue, Sharpness, and
Saturation.
temperature for the image. Options are Standard, Warm,
Cool or Custom.
• Choose Custom to adjust RGB.
Press/on the remote control to select an aspect ratio.
Options are 16:9 or 4:3.
Adjust brightness level from 0-100.
• Full stands for 0-255 RGB color.
• Limit stands for 16-235 RGB color.
Switch on to display a defaulted photo every 6 hours and
prevent burn-in from fixed picture content.
Choose preferred Gamma value for the video wall. The value
range is 2.0/2.2/2.4.
• Choose a preset sound environment. Options are
Standard, Music, Cinema, Sports, or Custom mode.
• Under Custom mode, press /on the remote control
to adjust sound related parameters.
Press /on the remote control to adjust Balance.
Enable/disable the surround sound.
Adjust the bass level from 0-100.
Adjust the treble level from 0-100.
Basic operations
Description
Description
23