Badger Meter Data Industrial 340 BN/MB Installation & Operation Manual page 16

Data Industrial® 340 BN/MB BTU Energy Transmitter
NOTE:
N If communication still does not occur and you are using a DB9 to COM 1 or COM2, try using a USB to COM adapter
This will usually create a new COM port that was not previously listed Windows Device Manager can be helpful in
determining the actual COM ports that are available
Select this new port created by the adapter and the screen should change as shown (Figure 20) Notice that the "---"
are replaced with values This confirms normal communications
Page 16
Figure 19: Device Manager
Figure 20: Screen Change
July 2012