Assembling The Lawn Scarifier; Attaching The Handlebar; Removing The Combing Roller From The Transport Compartment Before Use For The First Time - Stihl RLE 240 Instruction Manual

English

6 Assembling the Lawn Scarifier

6.1

Attaching the Handlebar

► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Place the lawn scarifier on a level surface.
8 9
1
2
8
► Push holder (8) onto bolts (7).
► Align upper handlebar (1) and centre handlebar
section (2) so that the bores align.
► Insert bolt (7) and align so that the bolt head is flush with
centre handlebar section (2) on both sides.
► Place washer (4) on bolt (7).
► Screw on wing nut (3).
► Align lower handlebar (10) and centre handlebar
section (2) so that the bores align.
► Insert bolt (7) and align so that the bolt head is flush with
centre handlebar section (2) on both sides.
► Place washer (4) on bolt (7).
► Screw on wing nut (3).
► Press cable (9) into holders (8).
The handlebar must not be dismantled again.
38
6.2
► Switch the lawn scarifier off and detach the extension
cable connector from the mains plug of the lawn scarifier.
► Place the lawn scarifier on a level surface.
6 7
5
4
3
10
► Open quick-clamping devices (1) and fold down the
handlebar to the rear.
► Hold the lawn scarifier at the lower transport handle and
upend.
► Remove the cable ties.
► Remove the combing roller from the transport
compartment and keep it in a safe place.
6 Assembling the Lawn Scarifier
Removing the Combing Roller from the
Transport Compartment Before Use for the First
Time
2
1
1
2
0478-670-9910-A