Setup And Installation; Machine Installation - Atari Mini PONG Jr. Product Manual

Mini PONG Jr. Manual
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
 Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 1) for places to avoid.
 Place the unit on a dry level surface.

Ventilation openings in the back of the unit must not be obstructed by objects or by wall.

4.1 Machine Installation

4.1.1 Open the package and take Mini PONG Jr. out.
4.1.2 Without battery: Connect Charger Cable to Charger and Mini PONG Jr.. The product will
power on automatically.
With battery: Open the battery box, install the 18650 Lithium battery according to the
"+" "-" label on the battery box. Hold ON/OFF button to power on and start to play.
Note: a charger cable should be connected when first using battery to activate.
Notice: Only one battery can be installed on the battery box.
4.2 About Game
4.2.1 Hold ON/OFF button can power on or off the game.
4.2.2 If the game is not started in 3 minutes, the product will enter Standby mode and
automatically black screen. You need to press the ON/OFF button to restart the screen.
4.2.3 A typical recharge takes about 2 hours.
-
6
+