SIGMATEK ETT 764 Operating Manual
  1. Manuals
  2. Brands
  3. SIGMATEK Manuals
  4. Touch Panel
  5. ETT 764
  6. Operating manual

SIGMATEK ETT 764 Operating Manual

Multi-touch operating panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ETT 764
Multi-touch Operating Panel
Operating Manual
Date of creation: 08.02.2021
Version date: 24.03.2021
Article number: 01-230-764-E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ETT 764 and is the answer not in the manual?

Questions and answers

Related Manuals for SIGMATEK ETT 764

Summary of Contents for SIGMATEK ETT 764

  • Page 1 ETT 764 Multi-touch Operating Panel Operating Manual Date of creation: 08.02.2021 Version date: 24.03.2021 Article number: 01-230-764-E...
  • Page 2 (print, photocopy, microfilm or in any other process) without express permission. We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible for technical or printing errors in this handbook and assumes no responsibility for damages that...
  • Page 3 ETT 764 Multi-touch Operating Panel ETT 764 The ETT 764 is an intelligent panel for visualizing, operating and monitoring automated processes. Process diagnostics is therewith simplified. A projective capacitive touch screen serves as the input medium for process data and parameters.

  • Page 4: Table Of Contents

    ETT 764 MULTI-TOUCH OPERATING PANEL Table of Contents 1 Introduction 1.1 Target Group/Purpose of this Operating Manual 1.2 Important Reference Documentation 1.3 Contents of Delivery 2 Basic Safety Guidelines 2.1 Symbols Used 2.2 Disclaimer 2.3 General Safety Guidelines 2.4 Software/Training 3 Standards and Guidelines 3.1 Guidelines...
  • Page 5 MULTI-TOUCH OPERATING PANEL ETT 764 5.1.5 X7: USB Online OTG 2.0 (Type Mini-B) 5.2 Applicable Connectors 5.3 Status Display LEDs 6 Mechanical Dimensions 7 Assembly/Installation 7.1 Check Contents of Delivery 7.2 Installation 7.3 Mounting Instructions 7.3.1 Required Cutout for Mounting the Terminal 7.3.2 Mounting Position...
  • Page 6 ETT 764 MULTI-TOUCH OPERATING PANEL 15 Display „Burn-In“ Effect 15.1 Screen Saver 16 Disposal 17 Accessories 17.1 Touch Pen 17.2 Battery 18 Application Information 18.1 Storage Media 18.2 Updating the Operating System Page 4 24.03.2021...

  • Page 7: Introduction

    General knowledge of automation technology is required. Further help and training information, as well as the appropriate accessories can be found on our website www.sigmatek-automation.com. Our support team is happily available to answer your questions. Please see our website for our hotline number and business hours.

  • Page 8: Basic Safety Guidelines

    ETT 764 MULTI-TOUCH OPERATING PANEL 2 Basic Safety Guidelines 2.1 Symbols Used The following symbols are used in the operator documentation for warning and danger messages, as well as informational notes. DANGER Danger indicates that death or serious injury will occur, if the specified measures are not taken.
  • Page 9 MULTI-TOUCH OPERATING PANEL ETT 764 CAUTION Caution indicates that moderate to slight injury can occur, if the specified measures are not taken. To avoid moderate to slight injuries, observe the all guidelines. Attention indique une situation dangereuse qui, faute de prendre les mesures adéquates, peut entraîner des blessures assez graves ou...

  • Page 10: Disclaimer

    It does not guarantee properties under the warranty. Please thoroughly read the corresponding documents and this operating manual before handling a product. SIGMATEK GmbH & Co KG is not liable for damages caused through, non-compliance with these instructions or applicable regulations.

  • Page 11: General Safety Guidelines

    2006/42/EG guidelines is correct. As long as the machine with which the product should be used does not comply with the guideline, operating this product is prohibited. Operate the unit with devices and accessories approved by SIGMATEK only. 24.03.2021...

  • Page 12: Software/Training

    ETT 764 MULTI-TOUCH OPERATING PANEL CAUTION Handle the device with care and do not drop or let fall. Prevent foreign bodies and fluids from entering the device. The device must not be opened, otherwise it could be damaged! Manipulez l’appareil avec précaution et ne le laissez pas tomber.

  • Page 13: Standards And Guidelines

    The product was constructed in compliance with the following European Union guidelines and tested for conformity. 3.1.1 EU Conformity Declaration EU Declaration of Conformity The product ETT 764 conforms to the following European guidelines: 2014/35/EU Low-voltage Guideline 2014/30/EU Electromagnetic Compatibility (EMC Guideline) 2011/65/EU “Restricted use of certain hazardous substances in electrical and electronic equipment”...

  • Page 14: Technical Data

    ETT 764 MULTI-TOUCH OPERATING PANEL 4 Technical Data 4.1 Performance Data Processor EDGE3-Technology Processor cores Internal program and 2-GByte (DDR4) data memory (RAM) Internal remnant data memory 128-kByte FRAM Internal storage device 8-GByte eMMC Optional memory expansion microSD Graphic integrated in EDGE processor...

  • Page 15: Electrical Requirements

    MULTI-TOUCH OPERATING PANEL ETT 764 4.2 Electrical Requirements Supply voltage +24 V DC ±20 % (SELV/PELV) UL: Class 2 of LVLC Protection class Current consumption of (+24 V) typically 320 mA maximum 530 mA power supply (with no external devices...

  • Page 16: Display

    ETT 764 MULTI-TOUCH OPERATING PANEL 4.3 Display Type 7” TFT color display Resolution WSVGA 1024 x 600 pixels Color depth 24-Bit RGB LCD mode normally black LCD Polarizer transmissive Pixel size 0.1506 x 0.1432 mm Active range 154.21 x 85.92 mm...

  • Page 17: Control Unit

    MULTI-TOUCH OPERATING PANEL ETT 764 4.4 Control Unit Touch panel projective capacitive touch panel Cleaning see chapter: 13.1 Cleaning and Disinfecting the Touch Screen INFORMATION A projective capacitive touch screen is built into the panel, with which 10-finger input, zoom and gesture functions can be implemented. Data can be input using fingers, a project capacitive touch pen as well as with thin gloves.

  • Page 18: Minimum Distance Between Operating Elements For Multi-Touch Applications

    ETT 764 MULTI-TOUCH OPERATING PANEL 4.5 Minimum Distance between Operating Elements for Multi-touch Applications To guarantee smooth operation with multi-touch applications, buttons and control elements that should be operated at the same time must have a realistic minimum clearance. INFORMATION The size of the buttons and operating elements directly affect the operability of the application.

  • Page 19: Environmental Conditions

    MULTI-TOUCH OPERATING PANEL ETT 764 4.6 Environmental Conditions Storage temperature -10 … +70 °C Environmental temperature 0 … +50 °C Humidity 10-95 %, non-condensing Installation altitude above sea 0-2000 m without derating level > 2000 m up to a maximum of 5000 m with derating of the maximum environmental temperature by 0.5 °C per 100 m...

  • Page 20: Interfaces

    ETT 764 MULTI-TOUCH OPERATING PANEL 5 Interfaces 5.1 Rear Connectors 5.1.1 X1: Supply (4-pin Phoenix RM 3.5) Function +24 V DC +24 V DC 5.1.2 X2, X3: Ethernet 1, 2 (10/100/1000 Mbit/s) (RJ45) Function Page 18 24.03.2021...

  • Page 21: X4, X5: Usb 2.0 (Type A)

    By configuring the packet filter (Firewall or Router) accordingly however, it is possible to connect a network with SIGMATEK hardware to a third party network without triggering the error mentioned above.

  • Page 22: X7: Usb Online Otg 2.0 (Type Mini-B)

    ETT 764 MULTI-TOUCH OPERATING PANEL INFORMATION It is recommended that only storage media provided by SIGMATEK be used The number of read and write actions have a significant influence on the lifespan of the storage media. The microSD card is not intended as an exchangeable medium and should therefore be removed from the card holder for maintenance pur- posed only.

  • Page 23: Status Display Leds

    MULTI-TOUCH OPERATING PANEL ETT 764 5.3 Status Display LEDs Two status LEDs for diagnostics are located on the front. LED Green (1) LED Red (2) Status Lights - Supply voltage OK - During operating system start - Application running Lights...

  • Page 24: Mechanical Dimensions

    ETT 764 MULTI-TOUCH OPERATING PANEL 6 Mechanical Dimensions Dimensions 191 x 128 x 33 mm (W x H x D) Material Housing: aluminium/steel chromated Color: black Front: Glass 1.1 mm Weight 0.60 kg Page 22 24.03.2021...

  • Page 25: Assembly/Installation

    MULTI-TOUCH OPERATING PANEL ETT 764 7 Assembly/Installation 7.1 Check Contents of Delivery Ensure that the contents of the delivery are complete and intact. See chapter 1.3 Contents of Delivery. INFORMATION On receipt and before initial use, check the device for damage. If the device is damaged, contact our customer service and do not install the device in your system.

  • Page 26: Required Cutout For Mounting The Terminal

    ETT 764 MULTI-TOUCH OPERATING PANEL 7.3.1 Required Cutout for Mounting the Terminal Control cabinet cutout width X 168.5 mm Control cabinet cutout height Y 117.5 mm Maximum thickness of control cabinet wall Z 3.5 mm Page 24 24.03.2021...

  • Page 27: Mounting Position

    MULTI-TOUCH OPERATING PANEL ETT 764 7.3.2 Mounting Position Observe the mounting position of 60-120°. INFORMATION The specified installation distances may be reduced if appropriate measures and technical precautions are taken to dissipate the corresponding waste heat. 24.03.2021 Page 25...

  • Page 28: Wiring

    ETT 764 MULTI-TOUCH OPERATING PANEL 8 Wiring 8.1 Grounding The device must be grounded to protective earth (PE) via the blade terminal provided. In addition, ensure that when installing into the control cabinet, a large grounding surface is provided. It is important to establish a low-Ohm connection to ground to ensure error-free function.

  • Page 29: Esd Protection

    MULTI-TOUCH OPERATING PANEL ETT 764 8.3 ESD Protection CAUTION Typically, USB devices (keyboard, mouse etc.) are equipped with non- shielded cables. These devices are disrupted by ESD and in some instances, no longer function. Généralement, les périphériques USB (clavier, souris etc) ne sont pas équipés de câbles blindés.

  • Page 30: Process Diagram

    ETT 764 MULTI-TOUCH OPERATING PANEL 9 Process Diagram Page 28 24.03.2021...

  • Page 31: Status And Error Messages

    MULTI-TOUCH OPERATING PANEL ETT 764 10 Status and Error Messages Status and error messages are shown in the status test of the LASAL CLASS software. POINTER or CHKSUM messages can also be shown on the screen. Number Message Definition Cause/Solution...
  • Page 32 ETT 764 MULTI-TOUCH OPERATING PANEL Number Message Definition Cause/Solution An invalid checksum was Cause/Solution: s. POINTER CHKSUM detected before running the user program. WATCHDOG The program was Possible Causes: interrupted via the User program interrupts watchdog logic. blocked over a longer period of time (STI command forgotten).
  • Page 33 MULTI-TOUCH OPERATING PANEL ETT 764 Number Message Definition Cause/Solution The hardware monitoring Solution: WD DEFECT circuit (watchdog logic) is Exchange CPU defective. After power-up, the CPU checks the watchdog logic function. If an error occurs during this test, the CPU deliberately...
  • Page 34 ETT 764 MULTI-TOUCH OPERATING PANEL Number Message Definition Cause/Solution The CPU is in single step Info SINGLE STEP mode and is waiting for further instructions. READY: A module or project has Info been sent to the CPU and it is ready to run the program.
  • Page 35 OP INSTALLED The operating system has Info been reinstalled. OS TOO LONG The operating system Restart, report error to SIGMATEK. cannot be loaded; too little memory. Boot loader message, no Restart, report error to SIGMATEK. NO OPERATING SYSTEM operating system found in RAM.
  • Page 36 ETT 764 MULTI-TOUCH OPERATING PANEL Number Message Definition Cause/Solution This error does not occur This error code is used in the OFFLINE in the control. programming system to show that there is no connection to the control. Reserved APPL LOAD...
  • Page 37 Cause/Solution An error has occurred FLOATING POINT ERROR during a floating-point operation. DIAS-RISC-ERROR Error from the Intelligent Restart, report error to SIGMATEK. DIAS Master. INTERNAL ERROR An internal error has Restart, report error to SIGMATEK. occurred, all applications are stopped.
  • Page 38 ETT 764 MULTI-TOUCH OPERATING PANEL Number Message Definition Cause/Solution A connection error with an Possible Causes: S-DIAS ERROR S-DIAS module has Real network does not match occurred. the project, S-DIAS client is defective Solution: Analyze log file SRAM ERROR An error occurred while...
  • Page 39 MULTI-TOUCH OPERATING PANEL ETT 764 Number Message Definition Cause/Solution An unknown object from a C_UNKNOWN_CID stand-alone or embedded object, or an unknown base class was detected. The operating system C_UNKNOWN_CONSTR class cannot be created; the operating system is probably wrong.
  • Page 40 ETT 764 MULTI-TOUCH OPERATING PANEL Number Message Definition Cause/Solution The operating system is OP BURN currently being burned into the Flash memory. OP BURN FAIL An error has occurred while burning the operating system. The operating system is OP INSTALL currently being installed.

  • Page 41: Transport/Storage

    MULTI-TOUCH OPERATING PANEL ETT 764 11 Transport/Storage INFORMATION This device contains sensitive electronics. During transport and storage, high mechanical stress must therefore be avoided. For storage and transport, the same values for humidity and vibration as for operation must be maintained! Temperature and humidity fluctuations may occur during transport.

  • Page 42: Storage

    ETT 764 MULTI-TOUCH OPERATING PANEL 12 Storage INFORMATION When not in use, store the device according to the storage conditions. See chapter 11 Transport/Storage. During storage, ensure that all protective covers (if available) are placed correctly, so that no contamination, foreign bodies or fluids enter the device.

  • Page 43: Maintenance

    MULTI-TOUCH OPERATING PANEL ETT 764 13 Maintenance INFORMATION During maintenance as well as servicing, observe the safety instructions from chapter 2 Basic Safety Guidelines. Lors de l'entretien et de la maintenance, respectez les consignes de sécurité du chapitre 2 Basic Safety Guidelines.

  • Page 44: Service

    ETT 764 MULTI-TOUCH OPERATING PANEL WARNING If the device is contaminated with toxic or erosive chemicals, it must be carefully cleaned as quickly as possible to prevent personal injury and machine damage! Si l’appareil est contaminé par des produits chimiques toxiques ou érosifs, il doit être soigneusement nettoyé...

  • Page 45: Repair

    MULTI-TOUCH OPERATING PANEL ETT 764 13.3 Repair INFORMATION When sent for repair, the device should be transported in the original packaging if possible. Otherwise, packaging should be selected that sufficiently protects the product from external mechanical influences. Such as cardboard filled with air cushioning.

  • Page 46: Buffer Battery

    ETT 764 MULTI-TOUCH OPERATING PANEL 14 Buffer Battery A Lithium battery is installed at the manufacturer. The battery has enough capacity to preserve data in the absence of a supply voltage for up to circa 20 years. COMPANY DATA Lithium battery RENATA 3.0 V/235 mAh...

  • Page 47: Data Retention Battery Change

    MULTI-TOUCH OPERATING PANEL ETT 764 14.1 Data Retention Battery Change The exchangeable buffer battery ensures that the following data is preserved in the absence of a supply voltage: Time If the battery is empty, the following settings are reset or data is deleted: Time (reset to default value) 14.2 Exchanging the Battery...

  • Page 48: Display „Burn-In" Effect

    ETT 764 MULTI-TOUCH OPERATING PANEL 15 Display „Burn-In“ Effect The “Burn-In” effect describes a pattern burned into the display after displaying the same contents over a longer period of time (e.g. a single screen). This effect is also described mostly as “image sticking”, “memory effect/sticking” or “ghost image”.

  • Page 49: Disposal

    MULTI-TOUCH OPERATING PANEL ETT 764 16 Disposal INFORMATION Should you need to dispose of the device, the national electronic scrap regulation must be observed. The device appliance must not be disposed of as household waste. 24.03.2021 Page 47...

  • Page 50: Accessories

    ETT 764 MULTI-TOUCH OPERATING PANEL 17 Accessories 17.1 Touch Pen Description Order number Touch pen with holder V3 01-690-059-3 17.2 Battery Description Order Number Lithium battery RENATA 01-690-055 with 20 mm strap (one-sided) Page 48 24.03.2021...

  • Page 51: Application Information

    (lifespan drastically reduced). For cyclic writing, an external storage medium (e.g. microSD card or USB stick, depending on the respective device) from SIGMATEK must be used. Errors resulting from the use of storage media from other manufacturers are excluded from support.
  • Page 52 ETT 764 MULTI-TOUCH OPERATING PANEL Changes Chart Change date Affected Chapter Note page(s) 11.02.2021 4.3 Display Display brightness 4.6 Environmental Conditions IP Front 18.02.2021 14 Buffer Battery Data retention added and content restructured 23.02.2021 4.1 Performance Data microSD SD 3.0 5.1 Rear Connectors...

Table of Contents