Pentair COLOR SYNC CONTROLLER Installation Manual page 3

WARNINGS AND IMPORTANT SAFETY PRECAUTIONS
General Installation Information
1. All work must be performed by a licensed electrician or qualified pool professional, and
must conform to all national, state, and local codes.
2. Install to provide drainage of compartment for electrical components.
3. This equipment is not provided with integral Ground Fault Circuit Interruptors (GFCI)
protection. When this equipment is used to power or switch an underwater luminaire,
suitable GFCI protection shall be provided in the field. Luminaire circuit conductors shall
not occupy the conduit, boxes or enclosures with other circuits unless the other circuits
are also GFCI protected.
4. The electrical supply for this product must include a suitably rated switch or circuit
breaker to open all ungrounded supply conductors to comply with in accordance with the
current National Electrical Code (NEC), NFPA 70 or the Canadian Electrical Code (CEC),
CSA C22.1. All applicable local installation codes and ordinances must also be adhered
to. The disconnecting means must be readily accessible to the tub occupant but installed
at least 10 ft. (3.05 m) from the inside wall of the pool.
Color Sync Controller Installation Guide
3