Table of Contents
Advertisement
10
Installing the Outlet box
To install the outlet box:
1.
Position the controller and outlet box to meet National Electrical Code
requirements, and to prevent hazard to personnel.
2.
Run conduit from the pool/spa light niche to the junction box.
Note: The outlet box must be located a minimum distance of five (5)
feet measured horizontally from the inside wall of the pool and not
less than one (1) foot above the maximum pool water level
measured to the top of the outlet box.
3.
Remove the lower conduit plug from the outlet box.
4.
Mount the outlet box onto the conduit.
Color Sync Controller Installation Guide
Outlet Box
Lower
conduit
plug
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the COLOR SYNC CONTROLLER and is the answer not in the manual?
Questions and answers