Table of Contents
Advertisement
Available languages
Available languages
6.4 Troubleshooting
Error
The compressor is not functioning
7. Maintenance and care
7.1 Maintenance: When used according to the instructions, the Dual Power Compressor is maintenance-free. Store the com-
pressor in a dry, frost-free location.
7.2 Care: Switch the compressor off before cleaning, separate from the power supply. Clean the housing of the compressor
with a soft, dry cloth. Do not use any aggressive cleaning agents or solvent-based cleaners. Never allow liquids to penetrate
the housing.
8. Notes regarding environmental protection
Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must be collected sepa-
rately and disposed of in an environmentally responsible manner for recycling. Please contact your community or city
administration regarding disposal options for electrical and electronic scrap.
9. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
FR COMPRESSEUR DOUBLE PUISSANCE avec raccord 12V et 230V
N° d'art. 21076
Sommaire
1.
2.
3.
4.
5.
6.
7.
7.1 Maintenance
7.2 Entretien
8.
9.
10
Possible cause
The connection cable is not
connected correctly.
When operating using a vehicle:
No voltage to the on-board socket.
The fuses in the compressor
have been triggered.
Telefon: +49 (0)202 42 92 83 0
Telefax: +49 (0)202 2 65 57 98
Internet: www.eal-vertrieb.com
E-Mail: info@eal-vertrieb.com
Measure
Check the cable connection and
connect correctly.
Switch on the ignition of your vehicle.
Check the fuse for the on-board
socket and replace if necessary.
Replace the faulty fuse, see
section 6.3
11
11
11
11
12
12
12
13
13
13
14
14
14
14
14
14
14
14
15
15
Advertisement
Chapters
Table of Contents
