PrimAster PMGBS 7220 Operating Instructions Manual page 20

- Only hold the power tool on the insu-
lated handle surfaces, because the cut-
ting blade can come into contact with
concealed power lines. If the cutting blade
comes into contact with an energised line,
device parts can become energised and
cause an electric shock.
- Before starting work, search the hedge
for concealed objects, e.g. wire, etc. Pay
careful attention to ensure that the cutting
tool does not come into contact with wire or
other metal objects.
- Hold the power tool properly, e.g. with
both hands on the handles, if two handles
are present. Losing control of the device can
result in injuries.
Safety instructions for grass- and shrub shear
• This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge.
• This machine may cause serious injuries.
Please read the instruction manual carefully
as to the correct handling, the preparations,
the maintenance and the proper use of the
hedgetrimmer. Familiarize yourself with the
machine before the first use and also have
yourself introduced to practical use of the
machine.
• The cutting tool continues to run after the
device is switched off.
• Turn off power before cleaning.
• Beware! Keep your fingers away from the
cutting area!
• Only switch on the device if your hands and
feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such debris
while working!
• Turn the machine off before transporting
and wait until the blade stops moving. Main-
tenance and cleaning should be performed
GB | Operating Instruction
• Children and teenagers under 16 years of
• Never permit children or persons who are
• Statutory regulations can restrict the age of
• Be aware of third persons in the work area.
• Use of the machine must be prevented is
• Only use the shear in daylight or sufficiently
• The clippers must be subjected to regular
• The machine should be inspected and
• Wear suitable working clothes, i.e. protec-
• After you finish using the clippers and be-
• Check the cutting unit regularly for damage
• Never hold the clippers by the blades, you
• Never touch moving blades in an attempt to
• Keep the machine away from children and
• When working with the shears, always
7
only when the machine is turned off.
age must never use this device!
not familiar with the operating instructions
to use this device.
the operator.
people, especially children and house pets
are present.
bright artificial illumination.
maintenance and checks. Damaged blades
must be replaced as a pair. Professional
repair is required if damage occurs due to
impact.
maintained regularly by a responsible repair
service only.
tive glasses, protective means for ears,
non-slippery shoes and working gloves.
Do not wear broad clothes which could be
caught by the moving parts.
fore cleaning them, it is necessary to ensure
that the machine cannot be accidentally
turned on, such as by unlocking the switch.
may run the risk of injury even when the
clippers are not moving!
remove debris or if the blades are blocked.
Always switch off the device.
store it in a safe place.
take a stabile standing position, particularly
when you are using steps or a ladder.