Technical Specifications - PrimAster PMGBS 7220 Operating Instructions Manual

Technical Specifications

Battery voltage/operation voltage
Battery type
Operating time
Idle speed n
0
Blade width *
Cutting length **
Cutting thickness **
Weight (grass- / shrub shear)
Noise pressure level
(DIN EN 60745-2-15)
Vibrations
(DIN EN 60745-2-15)
Mains battery charger
Mains voltage
Charging voltage
Charging current
Charging time
Technical changes are reserved.
* Grass Shear ** Shrub Shear
Emission
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
- Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
Noise emission information in accordance with the German Product Safety Act (GPSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
GB | Operating Instruction
Cordless Grass & Shrub Shear PMGBS 7220 Primaster
V/DC
Ah/Wh
min.
rpm
mm
mm
mm
kg
dB (A)
2
m/s
JLH050900700G
V~ / Hz
V DC
mA
h
3
7,2
2,0 / 14,4 / Lithium-Ionen
approx. 160
1000
80
160
8
0,606 / 0,680
57,1
K=3,0 dB (A)
1,024 2
K=1,5 m/s
100-240 / 50-60
9
700
approx. 3 - 5