Trimming Your Video
Now that you've captured some video footage, you can trim it. For
example, you can change your Start and End points. You can also
choose the specific video frame that you want to use as the
thumbnail picture that is displayed in your Main project window.
1 From the Main project window, double-click the thumbnail for
the video clip you want to trim.
2 Use the controls in the Trimming window to trim your video.
Drag the green bracket to choose a Start Frame
3 Click OK when finished.
Note: For more advanced editing functions, use the ArcSoft
Showbiz companion software included with MyDVD. For
more information, see
Previewing Your Project
It's a good idea to see how your DVD/VCD project will look before
you burn it to the disc. To preview your project, press Preview at
the bottom of your Main project window, then double-click the
thumbnail clip you want to look at.
When you have previewed your project, press Stop.
Creating a Video Project with MyDVD
Drag the thumb to choose a Thumbnail image
Finding More Information on page
You can trim
out unwanted
video footage
Drag the red
bracket to
choose an
End Frame
19.
17