Advertisement
Parts counting:
In weighing mode press PCS button, the balance changes into the counting mode.
Place the reference
Keep the PCS button been pressed, the currently set reference quantity is displayed.
Use the MODE button to set the quantity of the placed reference (selectable 25, 50, 75, 100) and
acknowledge with PCS button.
Remove reference.
If necessary, tare the empty balance container.
Place counted pieces on pan and read the quantity of pieces.
Use MODE button to return to the weighing mode.
5. Adjustment
Arrange adjustment weight (see chap. 1).
Info about adjustment weights can be found on the Internet at: http://www.kern-sohn.com
Ensure that there are no objects on the weighing pan.
In weighing mode keep the MODE button pressed until <CAL> appears.
Press the MODE button again and wait until the weight value of the required adjustment weight
will appear flashing.
Place adjustment weight. Wait until <PASS>, followed by the weight value of the placed
adjustment weight will be displayed. After that the adjustment will be finished successfully.
In case of a diverging display the adjustment has failed. Repeat adjustment process.
6. Important Notes
•
Do not overload balance.
•
The occurrence of electromagnetic fields may result in major display deviations. Then change
location.
•
Avoid high air humidity, vapours and dust.
•
Do not bring the balance directly in contact with liquids.
•
Do not leave permanent load on the weighing pan.
•
Never operate balance in explosive environment. The serial version is not explosion protected.
•
Check the balance regularly with external test weights.
•
Warranty claims will be voided when the housing is opened.
7. Error messages
Capacity of batteries exhausted, change batteries
Adjustment required, see chap. 5
The placed weight exceeds the capacity of the balance. Reduce load.
Place the balance on a firm, level surface and level it.
8. Declaration of conformity
The current EC/EU Conformity declaration can be found online in:
www.kern-sohn.com/ce
3
TGD-BA-e-1810
Advertisement
