Advertisement
GB
1. Technical data
KERN
Item no./ Type
Readability (d)
Weighing range (max)
Adjustment weight, not added (class)
Operating temperature
Humidity of air
Automatic cut-off
Batteries
2. Scope of delivery
•
Pocket scale
•
Balance cover
3. Keyboard overview
ON/OFF
Switch on/off
MODE
Switch-over weighing unit
TARE
Taring / Setting to zero
PCS
Parts counting
4. Operation
Weighing:
Place the balance on a firm, level surface. Level balance with foot
screws until the air bubble of the water balance is in the prescribed
circle. Check levelling regularly
To switch on, press ON/OFF button, the balance completes a self check. As soon as the weight
display appears, the balance is ready for weighing. If required, set to zero by using TARE button.
Place load on pan and read the weighing result.
Use the MODE button to switch over into the available weighing settings.
Taring:
Place the empty weighing container.
Press the TARE button, the zero display disappears.
Weigh the material, the net weight will be indicated.
When the balance is unloaded the saved taring value is displayed with negative sign.
To delete the stored tare value, remove load from weighing pan and press the TARE button.
TGD-BA-e-1810
KERN TGD
Version 1.0 2018-06
Operating manual
Electronic Carat Pocket Scales
•
Weighing pan
•
Batteries (4 x 1.5 V AAA)
TGD 50-3C
TTGD 50-3C-A
0.001 g / 0.005 ct
50 g / 250 ct
50 g (F2)
+ 10° C .... + 30° C
max 80% air humidity (non-condensing)
after 300 seconds
4 x 1.5 V AAA (Running time rating 150 hrs)
•
•
Power cable
Operating manual
2
Advertisement
