Temperature Taking Hints - Braun IRT 3020 User Manual

Braun thermometer user guide irt 3520, irt 3020
Hide thumbs Also See for IRT 3020:
Table of Contents

Advertisement

Available languages

Available languages

4. While tugging the ear, fit the probe snugly into
the ear canal and press the activation button.
Release it, when you hear a beep. This is the
Temp Beep that confirms the end of measure-
ment.
5. Remove the thermometer from the ear canal.
The LCD displays the temperature measured.
6. Replace the lens filter after each measurement:
press the ejector button and put on a new, clean
lens filter.
7. New measurements can be taken as long as
the ready symbol
pressed within 2 minutes, the thermometer will
turn off automatically.
Note: In the following situations, it is recom-
mended that you take three temperatures in the
same ear. If they differ, use the highest reading.
• Infants in the first 90 days of life.
• Children under three years of age who have
a condition such as a compromised immune
system and for whom the presence or absence
of fever is critical.
• When you are first learning to use the ear
thermometer until you are comfortable with the
technique and are obtaining consistent readings.
Important: As with any type of thermometer, slight
temperature variations (± 0.2 – 0.3 °C /± 0.3 – 0.5 °F)
can occur, if consecutive measurements are taken.

Temperature taking hints

• The right ear reading may differ from the reading
taken at the left ear. Therefore, always take the
temperature in the same ear.
• Sleeping on an ear may cause the temperature
to be higher than normal. Therefore, wait a few
minutes if taking temperature after sleeping.
• The ear must be free from obstructions or excess
earwax build-up to take an accurate reading.
is shown. If no button is
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Irt 3520Thermoscan irt 3020Thermoscan irt 3520

Table of Contents