Regular Maintenance; To Test The Bark Control Collar - Petsafe Bark Control Collar Operating Manual

Regular Maintenance

: Check Contact Points for tightness weekly Note: Do not adjust the
factory preset Sensor Probe.
: Clean Contact Points with alcohol weekly Note: Remove the
battery and discharge the Bark Control Collar before touching the
Contact Points.
: Check your dog's neck for irritation and wash neck weekly.

To Test the Bark Control Collar

Slide the Sensor Probe across a rough surface for at least 10
inches. The Bark Control Collar should beep. If your Bark Control
Collar doesn't beep during this test, see "The Bark Control Collar
does not beep" in the "Troubleshooting" section, and continue
with the second step.
12 Customer Care Center 1-800-732-2677