To Insert And Remove The Battery - Petsafe Bark Control Collar Operating Manual

To Insert and Remove the Battery

Note: Do not install the battery while the Bark Control Collar is on your dog.
This Bark Control Collar utilizes a replaceable PetSafe
®
battery (RFA-67). This unique battery is designed to make
battery replacement easier and increase water protection.
To insert the battery, align the symbols on the battery
(arrow) and Bark Control Collar (triangle). Use a large coin
to turn the battery clockwise until the arrow lines up with
the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise
using a large coin. DO NOT attempt to cut into or pry open
the battery. Be sure to discard the used battery properly.
A replacement PetSafe battery (RFA-67) can be found at many retailers. Contact
®
the Customer Care Center at or visit our web site to locate a retailer near you.
Battery Life
Average battery life is 3 to 6 months, depending on how often your dog barks. However,
due to greater use during your dog's training, your first battery may not last as long as
replacement batteries.
Low Battery Indicator
During normal operation the Indicator Light remains off. As the product is used, the battery
will be drained to a weakened state. At this point, the Indicator Light will begin to flash to
show that it is time to change the battery.
10 Customer Care Center 1-800-732-2677