Ceado E5P Use And Maintenance Manual page 39

GB
ADJUSTING THE FILTER-HOLDER SUPPORT
The filter-holder support has been designed to work with the different holders found on the most
widespread coffee machines on the market and, in the "filter coffee" versions, it allows you to hook
the special container provided.
Using a medium size Phillips screwdriver, slacken the support retaining screw, adjust its height and
then tighten the screw again (see Fig. 15).
The optimum adjustment is the one that supports the filter-holder in a perfectly horizontal position.
Never operate without hopper and lid in place.
Make sure that shutter is completely open (to
the last click) (see Fig. 16).
When the grinder is not to be used during the time when
the business is closed, it should always be switched off
with the main switch.
Put only coffee beans in the hopper, not ready-
ground coffee or other substances
WARNINGS AND SUGGESTIONS
.
39
Fig. 15
Fig. 16