Adaptec ICP5045BL Supplementary Manual page 12

error message. Even though the drives are removed from the
Adaptec Storage Manager GUI, they may not really be deleted.
Reboot the controller; then, issue the ARCCONF DELETE command
again.
--------------------------------------------------------------------
7. Other Issues and Notes
- While a drive is being cleared, do not try to include it in a
new array. Doing so may cause unpredictable results.
- If you initialize one or more drives in a snapshot source pool,
the snapshot target cannot be deleted. To avoid creating a
snapshot drive that cannot be deleted, you must delete the
snapshot drive first, before you initialize the drives in
the source pool. Note that you can only delete a snapshot
with the CLI.
--------------------------------------------------------------------
(c) 2007 Adaptec, Inc. All Rights Reserved.
valuable trade secrets of Adaptec or its licensors. The software is
protected under international copyright laws and treaties. This software
may only be used in accordance with the terms of its accompanying license
agreement. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without prior written
consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.
This software contains the