Adaptec ICP5045BL Supplementary Manual page 6

5. Save and close the file.
6. Restart ICP Storage Manager.
2.4 Linux Setup Notes
- To run ICP Storage Manager under Red Hat Enterprise Linux for
x64, the Standard installation with "Compatibility Arch Support"
is required.
- To install ICP Storage Manager on Red Hat Enterprise Linux,
you must install two packages from the Red Hat installation CD:
o compat-libstdc7.3-2.96.122.i386.rpm
o compat-libstdc-devel-7.3-2.96.122.i386.rpm
NOTE: The version string in the file name may be different
than above. Be sure to check the version string on the
Red Hat CD.
For example, type:
rpm --install /mnt/compat-libstdc7.3-2.96.122.i386.rpm
where mnt is the mount point of the CD-ROM drive.
- To install ICP Storage Manager on Red Hat Enterprise Linux 4,
you must install the following package from the Red Hat
installation CD:
o xorg-x11-deprecated-libs-6.8.1-23.i386.rpm
NOTE: The version string in the file name may be different
than above. Be sure to check the version string on
the Red Hat CD.
- To install ICP Storage Manager on Red Hat Enterprise Linux 5,
you must install one of these packages from the Red Hat
installation CD:
o libXp-1.0.0-8.386.rpm
o libXp-1.0.0-8.x86_64.rpm
- To install ICP Storage Manager on Novell Linux Desktop 9
Service Pack 1 for 64-bit systems, you must install two
packages from the Novell Linux installation CD:
- liblcms-devel-1.12-55.2.x86_64.rpm
- compat-32bit-9-200502081830.x86_64.rpm
NOTE: The version string in the file name may be different
than above. Be sure to check the version string on the
Novell Linux CD.
2.5 VMware Setup Notes
(32-Bit)
(64-Bit)