SW-Stahl 10587L Instruction Manual

10587L
Mounting-Tool-Set for flexible Multi Ribbed Belts

General

This set allows a damage free mounting of flexible multi-ribbed belts. These type of belts
do not require an idler, but this special tool for a convenient and gentle assembly. E.g.
suitable for following models:
• BMW: 118, 120, 318, 325, 330, 335, 520, 525, 530, 535, 635, 730, X3, X5
• Chrysler: Grand Voyager, Voyager
• Citroen: C2, C3, C4, Jumper, Relay
• Fiat: Albea, Doblo, Marea, Multipla, Ducato, Fiorino, Fiorino Qubo, Linea, Palio,
Siena, Stilo, Strada Pick Up, Lancia: Lybra
• Ford: C-Max, Focus, Mondeo, Tourneo, Transit, Courier, Fiesta, Fusion
• Iveco: Daily
• Mazda: 3, 5, Axela
• Peugeot: 206, 207, 307, Boxer
• VOLVO: C30, S40, V50

Safety advice

• Be cautious when working on hot engines: risk of burn!
• Be careful when working on running engines – loose clothes, tools and other
things can be caught up in revolving parts of the engine and cause serious harm.
• Pull the key before you start working. This way you prevent the engine from
starting up unintentionally.
• Always consult specific servicing handbooks for detailed information about the
assembly and disassembly of the multi-ribbed belt.
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Strasse 65
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de