PURPoSE
The ventilator is designed to ensure continuous mechanical air exchange in flats, cottages, hotels, cafes and other domestic and public
premises. The ventilator is equipped with a regenerator that enables supply of fresh filtered air heated by means of extract air heat energy
recovery.
The ventilator is designed for wall flush mounting.
The unit is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust,
pathogenic germs).
PHYSICAl, MENTAl, oR SENSoRY CAPACITIES, oR THoSE WITHoUT THE APPRoPRIATE
DElIVERY SET
NAME
Ventilator
Mounting kit
Foam wedges
Spare polyurethane foam
User's manual
Packing box
DESIGNATIoN KEY
Solo
R
A
1
www.ventilation-system.com
THE UNIT SHoUlD NoT BE oPERATED BY CHIlDREN oR PERSoNS WITH REDUCED
THE UNIT MUST BE INSTAllED AND CoNNECTED oNlY BY PRoPERlY QUAlIFIED
PERSoNNEl AFTER THE APPRoPRIATE BRIEFING.
THE CHoICE oF UNIT INSTAllATIoN loCATIoN MUST PREVENT UNAUTHoRIZED
ACCESS BY UNATTENDED CHIlDREN.
35
A
l07
-9
TRAINING.
R
Additional options:
R – power cord with a switch
Ventilation hood type:
7 – MVMO 100 bV1sAn round metal grille
9 – MV102 V plastic ventilation hood
Duct length [mm]:
_ – 380
L07 – 700
Regenerator type:
_ – ceramic
A – aluminium
Rated air flow [m
Front panel type:
1 – with a decorative plastic cover plate
Automation:
A – equipped with automation
Air duct cross-section form:
R – round
Solo Series
NUMBER
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
/h]
3
5