Table of Contents
Advertisement
20.9 Menu Options
Deactivate Screensaver: When active (checked) any activated Windows screensaver will be
disabled temporarily.
Always on Top: When active (checked) the TotalMix window will always be on top of the Win-
dows desktop. Note: This function may result in problems with windows containing help text, as
the TotalMix window will even be on top of those windows, so the help text isn't readable.
Enable MIDI / OSC Control: Activates external MIDI control of the TotalMix mixer. In Mackie
Protocol mode the channels which are currently under MIDI control are indicated by a colour
change of the name field.
Submix linked to MIDI / OSC controller (1-4). The 8-channel group follows the currently se-
lected submix, means Hardware Output, when a different submix is chosen on the remote as
well as when doing this in TotalMix. When using multiple windows it can be useful to deactivate
this feature for specific windows. The view will not change then.
Preferences: Opens a dialog to configure several functions of the level meters and the mixer.
See chapter 19.6.
Settings. Opens a dialog to configure several functions like Talkback, Listenback, Main Out and
MIDI Remote Control. See chapter 19.7.
Channel Layout. Opens a dialog to hide channels visually and from remote. See 19.5.3.
ARC & Key Commands. Opens a window to configure the programmable buttons of the Stand-
ard, Advanced and Advanced Remote USB, and of the computer's keyboard keys F4 to F8.
Reset Mix. Offers several options to reset the mixer state:
Straight playback with all to Main Out. All Playback channels are routed 1:1 to the Hard-
ware Outputs. Simultaneously all playbacks are mixed down to the Main Out. The faders in
the third row are not changed.
Straight Playback. All Playback channels are routed 1:1 to the Hardware outputs. The fad-
ers in the third row are not changed.
Clear all submixes. Deletes all submixes.
Clear channel effects. Switches off all EQs, Low Cuts, Reverb, Echo and Stereo Width and
sets their knobs to default position.
Set output volumes. All third row faders will be set to 0 dB, Main and Speaker B to -10 dB.
Reset channel names. Removes all names assigned by the user.
Set all channels mono. Reconfigures all TotalMix FX channels to mono mode.
Set all channels stereo. Reconfigures all TotalMix FX channels to stereo mode.
Set inputs mono / outputs stereo (ADM). Preferred setup for best ASIO Direct Monitoring
compatibility. In most cases mono hardware outputs will break ADM. Mono inputs are in
most cases compatible. If not wrong panning might occur.
Total Reset. Playback routing 1:1 with mixdown to Main Out. Switches off all other func-
tions.
User's Guide HDSPe MADI © RME
59
Advertisement
Table of Contents
