Symbol LS 1220 Product Reference Manual page 80

For downloading specific parameters, <Data> takes the following format:
<Parameter number> <Parameter value>
where:
<Parameter number> = number of the parameter to be changed.
See Table 8-4 on page 8-24 for assignments.
<Parameter value> = value assigned to a specific parameter.
See Table 8-4 on page 8-24 for valid values.
These numbers follow the rule set forth for the data. That is, the number consists of two
bytes consisting of 30 + high nibble, 30 + low nibble.
For downloading all parameters, <Data> takes the following format:
<Parameter value>
where:
<Parameter value> = value assigned to a specific parameter.
See Table 8-4 on page 8-24 for valid values.
These numbers follow the rule set forth for the data. That is, the number consists of two
bytes consisting of 30 + high nibble, 30 + low nibble.
Note: In order to maintain compatibility with future upgrades and
enhancements, we recommend you do not change the reserved
bits.
For parameters 00 through 07, a value of 1 indicates a bit is set, and
enables a parameter. A value of 0 disables that bit, which disables
the parameter.
Programming
8-23