Advertisement
Chapter 3
Diesel Engine Safety Operation Specification
1. The operator should read the Maintenance Manual and know well about the
structure, operation and maintenance.
2. One who is not familiar with the operation instructions is not allowed to operate the
engine.
3. The engine is not permitted to be started unless the preparation protocol for the
engine starting has been completed.
4. Attention to the fire protection at the engine running, the fuel tank should be
providing a fire prevention device.
5. While the engine is operating, it is not permitted to be dismantled, checked and
adjusted.
6. Apply the emergency stop of the engine, when the oil pressure is lower or even falls
to zero, or with abnormal sound inside while engine running.
7. Once the engine over-speeds suddenly due to out of control, push the stop lever
immediately to stop the engine, then check the cause and remedy the fault. If the
stop lever is out of order, push down the decompression lever or block up the air inlet
port to stop the engine.
8. The circuit system should be altered only by the technical support.
9. The engine should be used in a well ventilated area to prevent the exhaust gas
pollute the working environment.
4
Advertisement
