Advertisement
Chapter 1
Description
Remington 495-2100-4100 series high speed diesel engine are based on the Ricardo
engine patent, for direct injection method, according to the operation method of the main
and auxiliaries of the marine diesel engine, optimizing so its operation with radiator cooling
system for land systems operation. The Rated Power is similar to the marine main engine
rating for continuous operation.
Chapter 2
Diesel Engine Operation and Hints
Every Diesel engine is tested at our factory during several hours according to ISO
standards, and submitted to extreme temperatures and overload.
Do not use bad quality or unclear fuel and oil.
Use the only diesel engine coolant in the radiator. Avoid tap water and never use
seawater.
Don not to operate without an air filter in good conditions and clear of dust.
Do not operate or start the engine unless the oil and coolant levels are at its full level.
Do not work at long time overload and such against work regulation.
Do no test the alternator or any electric parts by short circuit method.
Control the electric starting time and spacing between starting attempts.
Apply technical maintenance at fixed periods.
Drain out the cooling water to prevent the cylinder frost cracking at the ambient
temperature lower 0 ℃.
Inject hot water and oil at the ambient temperature lower than -5℃.
Do some test run as describe in the next chapters before using the new engine.
Do not speed up the engine suddenly and run with load, after the engine has been
started without load. Acceleration must be done slowly.
Identify the safety mark at engine operation.
Follow all the recommendations and security steps as instructed by your local
technical support.
Pay attention to all the above advices.
3
Advertisement
